Every home needs a good set of basic tools, and kits are a great way to get them at a considerable savings. Three things make Denali’s 115-piece kit stand out—the price, an exceptional selection of screwdriver bits, and last but not least, the bag. In fact, it’s hard to find a set of tools as extensive as this for anywhere near this price. If purchased separately, these items would cost $150.00

This kit includes all of the tools you need for just about any household chore, from hanging pictures to fixing a leaky faucet. They are of good quality and should handle all of your household chores and repairs for many years to come. Going through this kit, I really appreciated little touches rarely seen in basic tool sets, like the soft-grip rubber cover on the tape measure that makes it easy and comfortable to hold, and the dizzying array of bits that come with the ratcheting screwdriver handle.

But what’s really brilliant is that all of these tools come in a heavy-duty nylon bag. Most tool sets come in big, flat blow-molded cases that can be awkward to store and carry. Plus, some tools invariably fall out when you open the case. That’s why most professionals, after buying a tool set, will throw away the case it came in and go out and buy a separate tool bag or chest to store their tools. The Denali kit’s bag fits easily under a sink cabinet (it actually is the size of a breadbox), and has both a shoulder strap and hand-straps that Velcro together, making it easy to carry around. The mouth of the bag has metal stabilizing rods in the zipper, so it opens wide and stays open, meaning you can set it down, and easily get to any of the tools inside while you are working. There are a ton of pockets lining the inside and outside of the bag to carry little things like nails, screws, tape, picture hangers—all of the little things that seem to crowd your kitchen drawers.

Of course, what are most important are the tools themselves. Again, this is a well-appointed set of quality tools that should outfit you for just about any household need. Here is a complete tally:

What’s In The Bag

Hammer
This 16-ounce ripping hammer with heavy duty fiberglass handle is a medium-weight hammer that will handle most household jobs, with claws for pulling nails.

Torpedo level
A good sturdy level is a must for hanging or straightening pictures, checking tabletop alignment, or mounting towel bars and curtain rods. This 9-inch, aluminum model is accurate, lightweight and easy to handle.

Tape measure
The 3/4-inch wide by 16-foot long tape measure has a thumb lock, metric and English markings, marks for placing studs every 16-inches, a belt clip, and a soft-grip rubber shell that makes it easy to grip and comfortable to hold.

Heavy-duty zinc utility knife with rubber grip

Wrenches

• 16-piece hex key set
  These are also called Allen wrenches. The kit comes with 8 in metric and 8 in English measurements.
• 6-piece combination wrench set with steel clip

Pliers

• 8-inch needle- nose pliers with wire-cutting blades, useful for getting into small spaces and gripping small nails, screws, nuts, etc. (meets or exceeds ANSI standards)
• 8-inch diagonal pliers (meets or exceeds ANSI standards)
• 8-inch groove-joint pliers(meets or exceeds ANSI standards)
• 7-inch nickel-coated locking pliers are essential for getting a good, solid grip, especially when working in small spaces that don’t allow you to grip with your full strength.
• wire cutters

Screwdrivers
Wow, you’d never imagine needing a star-drive screwdriver, until you buy that fancy new European dishwasher. Denali’s kit includes a ratcheting handle with a selection of interchangeable bits to provide an exceptional array of screwdrivers in all sizes and head shapes. The ratcheting handle is a nice feature, making it a lot easier to drive screws that are upside down or in tough to see places, where you really don’t want release pressure on the screwdriver handle to keep turning it.

• 14 flat head: 4, 5, 6, and 7 mm and 3/32-, 1/8-, 5/32-, 3/16- (x3), 7/32-, and 1/4- (x3) inch
• 9 Phillips head: 1x2, 2x5, and 3x2
• 3 square head: S1, S2, and S3
• 10 star head: T6, T7, T8, T10, T15, T20, T25, T27, T30, and T40
• 10 hex: 3, 4, 5, 6, and 7 mm and 1/8-, 5/32-, 3/16-, 7/32-, and 1/4-inch
• 4 Pozidriv: PZ0, PZ1, PZ2, and PZ3
  Poszidriv screws are similar to Phillips head screws, but are less prone to slippage at high torque and so provide better performance when working with air and power tools. Note that Pozidriv screwdrivers are likely to slip or tear out the screw head when used in Phillips screws.
• 14 nut drivers

Drill Bits
This is interesting, since the kit doesn’t come with a drill. The manufacturers apparently assume that either you have a cordless drill and will appreciate a couple of good bit sets, or that if you don’t have one, you should get one. They’re right. If you don’t have a good, basic, cordless drill, you’ll appreciate it when you do. Check out Amazon's selection of cordless drills.

• 13-piece titanium-coated high-speed steel with steel case: 1/4-, 15/64-, 7/32-, 13/64-, 3/16-, 11/64-, 5/32-, 9/64-, 1/8-, 7/64-, 3/32-, 5/64-, and 1/16-inch
• 50-piece chrome vanadium steel 1-inch screwdriver bit set can be used with either a cordless drill or the ratcheting screwdriver included in this kit.
• 5-piece masonry bit set with steel case: 5/32-, 3/16-, 1/4-, 5/16-, and 3/8-inch

No matter what your skill level might be you will eventually find the need to use a socket set to remove or tighten a bolt or nut. Furniture assembly, automotive or appliance repairs, computer parts, cabinet drawers or doors all have nuts or bolts that hold them together. The Great Neck Hardware Machinery 40-pc. socket set contains the most commonly used standard and metric-sized sockets. The 1/4-inch and 3/8-inch drive sockets come with a 3/8-inch reversible ratchet wrench plus accessories. The wrench and sockets are chrome plated for long lasting rust resistant performance. --C. Dwight Barnett

The Stanley Standard Fluted Screwdriver Set features ten of the most popular Phillips, slotted, stubby and pocket screwdrivers to satisfy a wide range of fastening needs. These tools are built with ergonomic, tri-lobular, slip-resistant handles to prevent blisters, provide positive torque, and make a comfortable grip; the heat treated, alloy steel blades with rust resistant nickel-plated bar hold up to repeated use. The hardened tips give a non-slip fit; these screwdrivers will unstick even the most hopelessly stripped screws. The set is backed by a lifetime limited warranty.

What's in the Box
1-point Phillips screwdriver, 2-point Phillips screwdriver, 4 slotted screwdrivers, 2 stubby screwdrivers, and 2 pocket screwdrivers.